Simple Steps for Inflating Your Air Track Mat

You will be very excited when receiving your new air track mat. So, how to inflate it fully? To help you use the mat as soon as possible. We will give you some steps for inflating the air track easily.

Read the preparing steps carefully

You need to find a good and flat surface for your air track mat to avoid damage, make sure there are no sharp objects on the surface. If you want to inflate the mat outside, please make sure you put something under the mat for protection.
Have you found a good place to place on it? If yes, then place your mat (with the bag around it) in the desired location.
Remove the bag from the mat and unfold it.
Then place the pump in the connection and connect it to one of the valves (no matter which one you start from, they are the same).
Turn on the pump and wait for the air track mat to inflate hard enough at the required pressure.
Is the mat pumped enough? Then turn off the pump and disconnect it from the mat.
That's right, the mat is now ready for use!
If it is over-inflated, you can lower the pressure by pressing the valve.

Of course, you can adjust the pressure according to your preference. The more inflated, the harder the air track.

This mat is very easy and fast to be inflated, and it can be filled within 3 minutes. It can be used for a long time without inflating continuously.

How can you deflate it?

How do you drain your air track? Make sure your device is not wet or dirty. Plug the pump in and turn it on, then use a hose to connect it to the valve you inflated to deflate it. After deflation, even you can also roll it up and put it away.

Where to buy an air track mat?
Of course, if you don’t have an air track mat and plan to buy one. then you have come to the right place. Kameymall is a large website that supplies various types of these mats, which come in different colors, sizes, and shapes. We hope that you will get the product that you desire.